View 2SA2016_6159.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6309A
PNP/NPN Epitaxial Planar Silicon Transistors
2SA2016/2SC5569
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers, strobes.
Package Dimensions
unit:mm 2163
[2SA2016/2SC5569]
4.5 1.6 1.5
Features
* Adoption of FBET and MBIT processes. * High current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall package facilitales miniaturization in end products. * High allowable power dissipation.
3 0.5 0.4 1.5 3.0 0.75
2
1 0.4
1.0
2.5 4.25max
Specifications
( ) : 2SA2016 Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (250mm2x0.8mm) Tc=25C
1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view)
Conditions
Ratings (-50)80 (-)50 (-)6 (-)7 (-)10 (-)1.2 1.3 3.5 150 -55 to +150
Unit V V V A A A W W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)500mA VCE=(-)10V, IC=(-)500mA VCB=(-)10V, f=1MHz 200 (290) 330 (50)28 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz MHz pF Unit A A
Marking : 2SA2016 : AW 2SC5569 : FF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
52501TS KT TA-3259 No.6309-1/5
2SA2016/2SC5569
Continued on preceding page.
Parameter Symbol Conditions IC=(-)3.5A, IB=(-)175mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(-)2A, IB=(-)40mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) IC=(-)2A, IB=(-)40mA (-50) 80 (-)50 (-)6 (40)30 (225) 420 25 Ratings min typ (-230) 160 (-240) 110 (-)0.83 max (-390) 240 (-400) 170 (-)1.2 Unit mV mV mV mV V V V V V ns ns ns ns
V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO ton tstg tf IE=(-)10A, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit
Switching Time Test Circuit
PW=20s D.C.1% INPUT VR 50 RB + 100F + 470F IB1 IB2 OUTPUT RL
VBE=--5V VCC=25V 20IB1= --20IB2= IC=2.5A (For PNP, the polarity is reversed.)
--7
IC -- VCE
2SA2016 --90mA --80mA --70mA --60mA
7
IC -- VCE
90mA
80mA
--6
6
Collector Current, IC - A
--5
--4
0 --1
0
mA
A --50m A --40m
Collector Current, IC - A
5
100
70mA 60mA 50mA 40mA
30mA
--30mA --20mA
4
mA
20mA
3
--3
10mA
2
--2
--10mA
--1
1
0 0
IB=0 Collector-to-Emitter Voltage, VCE - V
--0.4 --0.8 --1.2 --1.6 --2.0 IT00206
0 0
2SC5569
0.4 0.8 1.2 1.6
IB=0
2.0 IT00207
Collector-to-Emitter Voltage, VCE - V
8 7
--8 --7
IC -- VBE
2SA2016 VCE=--2V
IC -- VBE
2SC5569 VCE=2V
Collector Current, IC - A
Collector Current, IC - A
--6 --5 --4 --3 --2 --1 0 0
6 5 4 3 2 1 0
Ta= 75 25C C --25 C
--0.2
Base-to-Emitter Voltage, VBE - V
--0.4
--0.6
--0.8
--1.0
--1.2 --1.4 IT00208
0
0.2
Base-to-Emitter Voltage, VBE - V
0.4
Ta=7 5 C 25C --25 C
0.6 0.8 1.0
1.2
1.4 IT00209
No.6309-2/5
2SA2016/2SC5569
1000 7 5
hFE -- IC
2SA2016 VCE=--2V
1000 7 5 3 2
hFE -- IC
Ta=75C 25C --25C 2SC5569 VCE=2V
DC Current Gain, hFE
2
DC Current Gain, hFE
3
Ta=75C 25C --25C
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5 7 --0.1
2
3
Collector Current, IC - A
5 7 --1.0
2
3
5 7 --10 IT00210
10 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC - A
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
5 7 10 IT00211
--1000
VCE(sat) -- IC
2SA2016 IC / IB=20
VCE(sat) -- IC
2SC5569 IC / IB=20
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT00212
5C Ta=7 C --25
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
7 5
C 25
7 Ta=
C --25
5C
25
C
Collector Current, IC - A
--10000 7 5
Collector Current, IC - A
10000 7 5 3 2 1000 7 5 3 2 100 7 5 3 2 10 0.01 2 3
5 7 10 IT00214
VCE(sat) -- IC
2SA2016 IC / IB=50
VCE(sat) -- IC
2SC5569 IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
3 2 --1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3
7 Ta=
--25C
5 7 --0.1 2
5C
25C
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
5 Ta=7
C
25C
C --25
5 7 0.1 2 3 5 7 1.0
3
5 7 --1.0
2
3
Collector Current, IC - A
--10000 7
5 7 --10 IT00213
2
3
Collector Current, IC - A
10000
5 7 10 IT00215
VBE(sat) -- IC
2SA2016 IC / IB=50
VBE(sat) -- IC
2SC5569 IC / IB=50
7
Base-to-Emitter Saturation Voltage, VBE (sat) - V
Base-to-Emitter Saturation Voltage, VBE (sat) - V
5 3 2
5 3 2
--1000 7 5 3 2
Ta=--25C 75C 25C
1000 7 5 3 2
Ta=--25C 75C 25C
--100 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC - A
5 7 --10 IT00216
100 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC - A
5 7 10 IT00217
No.6309-3/5
2SA2016/2SC5569
5 3
Cob -- VCB
2SA2016 f=1MHz
5 3
Cob -- VCB
2SC5569 f=1MHz
Output Capacitance, Cob - pF
Output Capacitance, Cob - pF
2 100 7 5 3 2 10 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5
2 100 7 5 3 2 10 7 5 3 2 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5
Collector-to-Base Voltage, VCB -- V
1000 7
IT00218 1000
Collector-to-Base Voltage, VCB -- V
IT00219
f T -- IC
2SA2016 VCE=--10V
f T -- IC
2SC5569 VCE=10V
7
Gain-Bandwidth Product, fT - MHz
5 3 2
Gain-Bandwidth Product, fT - MHz
5 3 2
100 7 5 3 2
100 7 5 3 2
10 5 7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3
10
Collector Current, IC - A
2 10 7 5
5 7 --10 IT00220 2.0
5 7 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC - A
5 7 10 IT00221
ASO
ICP=10A IC=7A
DC
PC -- Ta
2SA2016 / 2SC5569
100ms
3 2 1.0 7 5 3 2 0.1 7 5 3 2
Collector Dissipation, PC - W
Collector Current, IC - A
1m 10 s ms
op
s 0 10
1.5 1.3
s 0 50
M
ou
era tio n
nte
do
1.0
na
ce
ram
ic
bo
ard
(25
0.01 0.1
2SA2016 / 2SC5569 Tc=25C Single pulse For PNP, the minus sign is omitted.
2 3 5 7 1.0 2 3 5 7 10 2 3
0.5
0m
m2 x0
.8m
m)
140 160
0 5 7 100 IT00222 0 20 40 60 80 100 120
Collector-to-Emitter Voltage, VCE - V
4.0 3.5
Ambient Temperature, Ta - C
IT00223
PC -- Tc
2SA2016 / 2SC5569
Collector Dissipation, PC - W
3.0 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 120 140 160
Case Temperature, Tc - C
IT01535
No.6309-4/5
2SA2016/2SC5569
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 2001. Specifications and information herein are subject to change without notice.
PS No.6309-5/5

▲Up To Search▲

Price & Availability of 2SA2016

	To Download 2SA2016 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .